S200 - Amplificatore 2 x 100 W @4 ohm
La S200 Chevin è progettato per soddisfare lo standard per l'amplificazione professionale.
La verniciatura a polvere in acciaio su piastre e telaio in acciaio riflettono la qualità di produzione all'interno.
Potenza in uscita
Entrambi i canali, 4 Ohm, 1 kHz, 1%THD, 75 W per channel
Canale singolo, 4 Ohm, 1 kHz, 1%THD, 90 W / channel
Entrambi i canali, 8 Ohm, 1 kHz, 1%THD, 45 W per channel
Canale singolo, 8 Ohm, 1 kHz, 1%THD, 66 W / channel
Bridge, 8 Ohm, 1 kHz, 1%THD, 160W
Distorsione 1 kHz, THD % <0.02%
Risposta in frequenza
Con filtri subsonici, +0-1dB, 47Hz–45kHz
SSF fc = 36Hz, 24dB/oct., +0-3dB, 36Hz–80kHz
Damping Factor 8 Ohm, 1kHz, > 380
S/n Ratio -92dB
S/n Ratio “A“ pesato, -97dB
Sensibilità in ingresso – a potenza nominale / 8 Ω, 0,775 V
Impedenza in ingresso simmetrica, 20 kΩ
Slew Rate / 8 Ω, 17V/μS
Controlli Frontali pulsante accensione, controllo volume (per canale)
Indicatori Bridge: LED Giallo - Protezione, Clip: LED Rosso - Segnale: LED Verde - Alimentazione: LED Verde
Raffreddamento per convenzione
Protezione cortocircuito, temperatura
Dimensioni 483x44x300mm/1U
Peso 6,5 kg
Consumo potenza max. 320 W
Alimentazione AC~230V/120V 50/60Hz
The Chevin S200 is designed to meet the standard for professional amplification. Its powder coated steel face plates and heavy-duty steel chassis reflect the manufacturing quality within.
Output PowerBoth channels driven, 4 Ohm, 1 kHz, 1%THD, 75 W per channel
Single channel driven, 4 Ohm, 1 kHz, 1%THD, 90 W / channel
Both channels driven, 8 Ohm, 1 kHz, 1%THD, 45 W per channel
Single channel driven, 8 Ohm, 1 kHz, 1%THD, 66 W / channel
Bridge, 8 Ohm, 1 kHz, 1%THD, 160W
Distortion, 1 kHz, THD % <0.02%
Frequency responsewith subsonic filter 47Hz–45kHz
SSF fc = 36Hz, 24dB/oct. 36Hz–80kHz
Damping Factor, 8 Ohm, 1kHz, > 380
S/n Rati, -92dB
S/n Ratio “A“ weighted, -97dB
Input Sensitivity – by nominal power / 8 Ω, 0,775 V
Input Impedance balanced, 20 kΩ
Slew Rate / 8 Ω Controls, 17V/μS
Controls,
Front: mains switch, volume control (both channels)
Indicators
Bridge: yellow LED Protect - Clip: red LED - Signal: green LED - Power: green LED
Cooling convection
Protection shortcircuit, temperature
Dimensions 483x44x300mm/1U
Weight 6,5 kg
Power Consumption max. 320 W
Power Requirements AC~230V/120V 50/60Hz