S600 - Amplificatore 2 x 600 W @4 ohm
Technical specification
| Output Power | |
| Both channels driven, 4 Ω, 1 kHz, 1 % THD | 600 W per channel |
| Single channel driven, 4 Ω, 1 kHz, 1 % THD | 640 W / channel |
| Both channels driven, 8 Ω, 1 kHz, 1 % THD | 340 W per channel |
| Single channel driven, 8 Ω, 1 kHz, 1 % THD | 360 W / channel |
| Bridge, 8 Ω, 1 kHz, 1 % THD | 1200 W |
| Distortion, 1 kHz, THD % | < 0.02 % |
| Frequency response | 20 Hz – 20 kHz +0 /-1 dB |
| - by 10 dB below nominal power | 20 Hz – 50 kHz +0 /-1 dB |
| Damping Factor, 8 Ohm, 1kHz | > 200 |
| S/n Ratio | - 103 dB |
| S/n Ratio “A“ weighted | - 112 dB |
| Input Sensitivity – by nominal power / 8 Ω | 1.0 V |
| Input Impedance balanced | 20 kΩ |
| Slew Rate / 8 Ω | 20 V / μS |
| Subsonic filter | On / Off and 40 Hz / 80 Hz |
| Limiter | On / Off |
| Controls | Front: mains switch volume control (both channels) Rear: DIP switch – mode selection BRIDGE switc |
| Indicators | Bridge: yellow LED Protect, Clip: red LED Signal: green LED Power: blue LED |
| Cooling | step switched fan |
| Protection | short-circuit, temperature |
| Dimensions | 483 x 88 x 370 mm |
| Weight | 9.0 kg |
| Power Requirements | AC ~ 230 V / 120V 50 / 60Hz |
Specifications
-
Output Power 4 Ω - single channel driven 640W 4 Ω - both channels driven 600W 8 Ω - single channel driven 360W 8 Ω - both channels driven 340W Bridge, 8 Ω, 1 kHz, 1 % THD 1200 W THD - 1 kHz, 8 Ω 0,02 % Frequency response 20 Hz – 20 kHz +0 /-1 dB - by 10 dB Frequency response -below nominal power 20 Hz – 50 kHz +0 /-1 dB Damping Factor 8 Ohm, 1kHz 200 S/n Ratio - 103 dB S/n Ratio “A“ weighted - 112 dB Input Sensitivity – by nominal power / 8 Ω 1.0 V Input Impedance balanced 20 kΩ Slew Rate / 8 Ω 20 V / μS Subsonic filter On / Off and 40 Hz / 80 HzLimiter On / OffControls Front: mains switch - volume control (both channels)Rear: SUBS. FILTER switch - BRIDGE switch Indicators BRIDGE : yellow LEDPROTECT, CLIP : red LEDSIGNAL : green LEDPOWER : blue LED Cooling step-switched fan Protections automatic limiter, short-circuit protection, thermal protection, protection against DC, overload protection., load-mismatch protection Power 230V AC 50Hz ; switched-mode PS Dimensions 483 x 88 x 370 mm Weight 9 kg
