S1504 - Amplificatore 2 x 1500 W @4 ohm

L'amplificatore S1500 è stato progettato per soddisfare tutti gli standard per l'amplificazione professionale. La sua verniciatura a polvere su piastre e telaio in acciaio riflettono la qualità di produzione dell'elettronica all'interno.S1504 front

Specifications

  • Output Power Both channel driven, 2,7 Ohm, 1 kHz, 1 % THD 1500 W per channel Single channel driven, 2,7 Ohm, 1 kHz, 1 % THD 1720 W / channel Both channel driven, 4 Ohm, 1 kHz, 1 % THD 1320 W per channel Single channel driven, 4 Ohm, 1 kHz, 1 % THD 1444 W / channel Both channel driven, 8 Ohm, 1 kHz, 1 % THD 800 W per channel Single channel driven, 8 Ohm, 1 kHz, 1 % THD 840 W / channel Bridge, 8 Ohm, 1 kHz, 1 % THD   2600WTHD - 1 kHz, 8 Ω 0,02 % Frequency response 20 Hz – 20 kHz +0 /-1 dB Frequency response -below nominal power 20 Hz – 50 kHz +0 /-1 dB Damping Factor 8 Ohm, 1kHz 200 S/n Ratio - 103 dB S/n Ratio “A“ weighted - 112 dB Input Sensitivity – by nominal power / 8 Ω 1.0 V Input Impedance balanced 20 kΩ Slew Rate / 8 Ω 20 V / μS Subsonic filter On / Off and 40 Hz / 80 HzLimiter On / OffControls Front: mains switch - volume control (both channels)Rear: SUBS. FILTER switch - BRIDGE switch Indicators BRIDGE : yellow LEDPROTECT, CLIP : red LEDSIGNAL : green LEDPOWER : blue LED Cooling step-switched fan Protections automatic limiter, short-circuit protection, thermal protection, protection against DC, overload protection., load-mismatch protection Power 230V AC 50Hz ; switched-mode PS Dimensions 483 x 88 x 380 mm Weight 12 kgS1504 back

  • Technical specification

    Output Power  
    Both channel driven, 2,7 Ohm, 1 kHz, 1 % THD 1500 W per channel
    Single channel driven, 2,7 Ohm, 1 kHz, 1 % THD 1720 W / channel
    Both channel driven, 4 Ohm, 1 kHz, 1 % THD 1320 W per channel
    Single channel driven, 4 Ohm, 1 kHz, 1 % THD 1444 W / channel
    Both channel driven, 8 Ohm, 1 kHz, 1 % THD 800 W per channel
    Single channel driven, 8 Ohm, 1 kHz, 1 % THD 840 W / channel
    Bridge, 8 Ohm, 1 kHz, 1 % THD 2600 W
    Distortion, 1 kHz, THD % < 0,02 %
    Frequency response 20 Hz – 20 kHz +0 /-1 dB
    - by 10 dB below nominal power 20 Hz – 50 kHz +0 /-1 dB
    Damping Factor, 8 Ohm, 1kHz > 200
    S/n Ratio - 103 dB
    S/n Ratio „A“ weighted - 112 dB
    Input Sensitivity – by nominal power / 8 Ω 1,0 V
    Input Impedance balanced 20 kΩ
    Slew Rate / 8 Ω 20 V / μS
    Subsonic filter On / Off 40 Hz / 80 Hz
    Controls Front: mains switch gain control (both channels) Rear: mode selection switch GND and subs. filter switches
    Indicators Bridge, Limit In, - Out: yellow LED Protect : red LED Signal: green LED Power: blue LED
    Cooling step switched fan air flow: front to back
    Protects short-circuit, thermal, load-mismatch, DC
    Power AC ~ 230 V / 120V 50 / 60Hz
    Dimensions 483 x 88 x 388 mm (2U)
    Weight 12,0 kg

     

Download catalogo

Download - S1504_data.pdf

Tags

Amp Install, Chevin